World's first frame accurate H.264 AVCHD cutter without re-encoding!

Posted: **Wed Jun 22, 2016 1:09 pm**

Hi,

if video parts must be re-encoded at no keyframes at which bit rate this is done? If the bit rate depending on the video resolution? Has it always a fixed value?
I'm testing the Smart Cutter and am satisfied so far. But It is very unfortunate that he just crashes at UHD / 4K videos.

Posted: **Fri Jun 24, 2016 2:31 am**

Dear urmel:
Thanks for your message.

'just crashes at UHD / 4K videos.'
If you could provide us UHd / 4K samples that will help a lot on our UHd / 4K development.

Could you please upload original UHd / 4K samples to our ftp server for a test?

Looking forward to your further message.
Thank you very much.

Best Regards,
FameRing Support Team

Posted: **Fri Jun 24, 2016 5:15 pm**

admin wrote:Dear urmel:

'just crashes at UHD / 4K videos.'
If you could provide us UHd / 4K samples that will help a lot on our UHd / 4K development.

http://4ktv.de/testvideos/

all UHD / 4k Testvideos. Sometime Smartcutter chrahes during cutting, sometimes during winding videos in preview monitor.

Can you please answer my first question with the bitrate in my first post?
Thx.

World's first frame accurate H.264 AVCHD cutter without re-encoding!

which bitrate is used after cutting by no keyframes?

which bitrate is used after cutting by no keyframes?

Re: which bitrate is used after cutting by no keyframes?

Re: which bitrate is used after cutting by no keyframes?